S-Chassis BLATANT Full Steering System

  • Click to enlarge
S-Chassis BLATANT Full Steering System

Tap to enlarge

£1,627.97


Product Information
Specification

**ALL OF THE PRODUCTS FROM ACOSTAL MOTORSPORT DEVELOPMENT ARE A 3 TO 4 WEEK LEAD TIME PRIOR TO SHIPPING TO THE UK**


The oneTen BLATANT Steering kit is designed to provide great feel, maximum lock, balance and tonnes of controllability to improve the steering performance of your drift car. The concept behind this keep is keeping caster angle to utilise the "jacking" effect to allow front wheel slip at large angle to provide balance at big angle. The top relocation provides you with improved caster over standard without introducing bind as well as 30mm of Camber adjustment. The lower control arms and caster rods provide maximum clearance and on car turnbuckle camber/caster adjustment.
 

Kit Includes:

 

  • 2x 110 BLATANT Lower Control Arms
  • 2x 110 Castor Rods
  • 2x Trailing Wheel Lock Stop Fitting (to Caliper)
  • 2x BLATANT Strut Relocation Tops
  • 2x 25mm Bolt-on Rack Spacers
  • 2x 110 Tie Rods
  • 2x Adjustable 110 Bolt-On Knuckles
  • 1x Adjustment Spanner

 

 

Lower Control Arms & Caster Rods (2pce)

 

  • Adjustable LCA Length from 395-440mm (standard ~360mm)
  • Camber/Caster via High-Tensile/Chromoly Turnbuckle Adjustment
  • Adjustable Rose Joint Spacing
  • Adjustable Lock Stops both for leading and trailing wheel
  • 350 Grade Steel laser cut design
  • Extremely rigid and strong to deal with the high loads
  • High clearance LCA design, can support up to 70 degrees of lock
  • Fits all standard, modified or direct replacement knuckles
  • 2-piece Chromoly PTFE/Kevlar-lined race Spherical Bearings
  • High clearance Caster rod design
  • Bolt on brake caliper lock stops to limit lock on lead wheel
  • Teflon bushed, clevis-design joint between LCA and Caster rod
  • Professionally Tig welded

 

 

Strut Top Relocation

 

  • Stainless Steel 2-piece, Teflon-lined Spherical bearings
  • Offset pivot point 20mm backwards to add ~2 degrees caster
  • 30mm Camber adjustment, 15mm each side of centre
  • Reduced bind at high lock
  • 350 grade Steel laser cut design
  • Designed for high loads
  • Professionally Tig welded

 

 

Rack Spacers

 

  • 4140 High-Tensile steel construction for heavy loads
  • 25mm of external spacing
  • 20mm of additional rack travel (6mm and 14mm)

 

 

Tie Rods

 

  • 0-15mm Bump Steer correction
  • 65 Degrees of Misalignment
  • Additional Length
  • Additional Adjustment
  • Quick change design
  • Chromoly Construction

 

 

Adjustable Bolt on Knuckle

 

  • High Tensile Steel Construction
  • 3-way Ackerman Adjustment
  • 45-60mm Roll Center Correction Adjustment
  • Proven Knuckle Design for high lock and feel
  • Increased Caster Trail for wheel return
  • Reduced Scrub Radius
  • Easy Installation

 

 

Adjustment Spanners

 

  • Makes adjusting turnbuckles easier
Product Code S-CN2WB942
Condition New

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Please enter a valid email address.
This field is required.
Top

©2017 www. bluebuttonmedia.co.uk and www.moidfab.co.uk - All rights reserved.

Follow Us

Mailing List

Enter your e-mail address to receive our newsletter
Please enter a valid email address.
Email address already subscribed.

©2017 www. bluebuttonmedia.co.uk and www.moidfab.co.uk - All rights reserved.

eCommerce by CubeCart